滚轮送料机优点：

1. 生产性：可多工程连续加工。
2. 高速性：每分钟可达 600 次。

3.泛用性：无论材料之宽度，只需调整送料机去配合模具即可使用。

4. 专用性：可依客户材料属性（型材，亮度电镀板及各类特殊材料）

设计制造。

5. 构造简单经济实惠。
6. 故障率低，保养容易。
7. 冲订直接传达室动，不耗电，气能源，节能减碳效果佳。

送料精度：

1. 依回转数及送料长度而有所不同，一般其精度可在

+0.05mm（依机型别精度有所不同），若有导销作定位时，

更可达 +0.01mmr 精度。

型式：

1. 单式：适用于卷料（厚度 0.15mm 以上），单制品或连续冲制品时用之。
2. 复式：适用于卷料（厚度 0.15mm 以上），短尺材料、单制品或连续冲制品时用之。

Features:

1.high productivity:suit mult-stage continuousproduct.

2.high speed:reach 600 SPM

3.universal usage:Easily adjust for different thicknessand widh.

4.speciality:special design for different materialproprty(shapes,surfaces...etc.)

5.Practical and economical with simple mechanism.

6.high reliability with easy maintenance.

7.All power direcly comes from press to saveenerhy cost.

Feeding Accuracy:

Depends on feed length and speed of press,the general accuracy is within+0.05mm（varied model has varied accuracy).

And can be even better up to +0.01mm when die havepilot pin to centralize material automatically.

Type:

1.singletype

Good for coil material.(Thickness above0.15mm)For make single process ormulti-process produt.

2.Double Type

Good for coil material.(Thickess under0.15mm)For make short pitch single process or multi-process product.

结构上四大特点 :

1. 单向轴承
2. 嵌有超硬合金，并配合滚筒轴承，具耐磨性、安定性、 精度高、寿命长。
3. 齿轮经过热处理 HRC60 再精密研磨、传动精度高。
4. 滚轮
5. 采用中空式、重量轻、回转惯性小，可及时停止，确保送料精度。
6. 经热处理 HRC60o 镀铬再研磨，硬度高、耐磨性优、寿命长。
7. 碟式刹车（一般刹车装置）

a 采用高级离合器来令片两面完全接触，寿命长、稳定性佳、精度高。

4. 逆向装置
5. 构造和单向装置一样，能相当精确地控制下轮，长时间使用亦不会使下轮有丝毫的倒退现象，稳定性和精度相当高。
6. 不因为冲压时所溅出的残油，而使刹车失灵产生下轮倒转，送距不准之现象。
7. 不易产生高热。
8. 附有超硬合金和滚柱，不易磨损。
9. 动作方式为滚柱作圆周运动，而不是如 4 根导柱的直线运动，因此不会有咬死的现象。
10. 摩擦力小，所需的传动扭力相对减少，传动机构不易损坏。
11. 配有逆向装置的配备时速度可达 30 米 / 分钟，一般为 20 米 / 分，提高了 50% 的效率。
12. 特殊结构，增加使用寿命。

Mechanism Features:

1.One way clutch

a.Made oftungsten carbide steel onthe contactting surface to keep rigidity，percision and durability.

b.The gear is hardened to HRC60 and ground for the best rigidity and durability.

2.Rooler

a.High feed accuracy at exact positioning with hollow roller of less weight,and lower inertia.

b.Hard chrome plated heat treated to HRC 60 and ground for the best rigidity and durability.

3.Disk Brake

a.Apply the advanced brake lining ti have accuracy,durability, and rigidity.

4.The Anti-reversing Device

a.The structure is the same with the one way cluth.It can precisely contol the lower roller which will not

reverse even in long time using. It is stable and precise.

b.Well protectio and loction to avoid the brake sliding to lost accuracy by wasted splash oil during

running.

c.It will not cause high heat.

d.Durable with super hard carbide surface and rollers.

e.The acting from of the rollers is circular line, so it will not stuck.

f.As less friction it will ocurrde, the torsion needed will be correspondingly less.And thetrabsfer stryre

will not easily wear out.

h.Soeed can reach 30M/min if the anti-reversing device is fitted. Generally it is 20M/min.

I.its special structure can increased it's using

life.

规格 :Specifications